Cleaning recommendations for taps

Enjoy using a clean product: how to descale and clean taps correctly

Water is clear, pure and fresh. We associate it with physical comfort and with boosting our energy levels. We treat ourselves to a nice bath or shower, wash our hands, our food and lots more. Every drop is precious, and anyone who is aware of hansgrohe’s attention to detail will also understand how passionate we are when it comes to cleaning and maintaining our products. Here are our tips for clean taps.

Cleaning and maintaining a tap: it’s easy

A tap is used every day. While it does the cleaning, it often becomes a “victim” of pollution itself. Our hands leave behind grease residues, particles of dirt and other marks. Even water takes its toll on the material, particularly in the form of limescale deposits. The advantage to you: with a tap from hansgrohe, you are purchasing a high-quality product. We want you to be able to enjoy using it for as long as possible. Here we show you how to correctly clean, descale and maintain your tap over the long term. 

Just one wipe, and it’s all clean

Just bear in mind the following tips, so that cleaning and maintaining your tap will be no big deal.

  • Step 1: It’s best to clean the surface of the hansgrohe tap with a soft cotton cloth (just moisten somewhat if required). Gently wiping removes most dirt, without damaging the material. Please do not use any metal sponges, brushes or micro-fibre cloths.
  • Step 2: Limescale residues tend to be deposited in corners and grooves. Use a mild citric acid-based cleaner which functions as a limescale remover. Please do not spray the concentrate directly onto the tap, spray it onto a cloth.
  • Step 3: The so-called aerator is easy to remove for cleaning. If you put it into hot water with a little bit of detergent, this gets rid of the deposits after an application time of about ten minutes. Lots of hansgrohe products are equipped with QuickClean technology. This fast anti-limescale function makes it easy to rub off any limescale on the tap.
  • Step 4: Carefully wash off any residues on the tap with clean water*
    *Tip: Please take note of external site conditions. For instance, in the event that the tap is mounted on top of an undermount basin with build-in cabinet, avoid pouring excessive amount of water over the tap to prevent water from seeping into the hole of the pull-out rod which may result in potential damage to cabinet if left overtime. Always check and clean off any excess water to leave the area dry. 
  • Step 5: Repeat the first tip again to completely remove any residues of the detergent and to give the surface a glossy finish.

One more tip: Clean the sink and the spout at the same time. Then everything will be gleaming again. So you can really enjoy using water.

Regularly cleaning of the basin tap keeps it looking pristine.
If a tap is clean, not only does it gleam brilliantly, it also supplies you with beautifully clean water all the time. So you can properly relax and enjoy your dream bathroom.

Choosing a cleaner – an odyssey through the product range?

We recommend that our customers use a mild, citric acid-based cleaner to clean taps. This has several advantages. conventional concentrates with lots of cleaning power often irritate hands and eyes, can trigger allergies and cause sensitive skin to turn red. They do similar things to the tap. Chemicals that are too strong will corrode its material. At first, the damage goes unnoticed, but microscopically small scratches or superficial burns are enough to tarnish the high-gloss finish. Over the long term, dirt and limescale can settle in these places. Mild detergents are also more eco-friendly.

If you have hard water in your area, limescale deposits are likely. Prevent the formation of residues by briefly wiping the tap, ideally after each time you use it for rinsing or washing. This removes tap water before it can settle.

Gentle maintenance on a regular basis makes your tap gleam

The hansgrohe quality laboratory has tested numerous cleaners and descalers. We came to the conclusion that in this regard, less is more. The substance citric acid is our favourite: effective, fragrant and not harmful to the tap or to humans. You can download our detailed cleaning recommendations as a PDF file.

We do not recommend using any cleaning agents based on vinegar, acetic acid, formic acid, sodium hydroxide and sodium hypochlorite, phosphoric acid or even hydrochloric acid. These substances are sometimes highly corrosive. If used frequently, they will damage the metal; even the most high-quality finish. We recommend citric acid for cleaning taps.

Authorised dealers

Locate showrooms of authorised dealers near you

For all enquiries:
info@hansgrohe.com.sg
For technical enquiries:
technicalservice@hansgrohe.com.sg
Showroom hotline:
6884 5060
Open Monday to Sunday | 11am to 8pm | Visits by appointment only | Last appointment at 7:30pm